2010 escape v 6 tune up !
#1
2010 escape v 6 tune up !
Hello, I am having to do a tune up on my wife's 2010 V6 ford escape. I can not find a video on this engine. Could anyone tell me how difficult it will be. Ford wants over 400. dollars and I do not have it.
I have bought all the parts, but I am getting cold feet, could really use a pep talk. ( LOL ). I would love any advice that would help my fears. I have done tune ups in past, but this engine looks intimidating, because of all the parts and electronics. Thank you. Need to get to it in about a week from now!
I have bought all the parts, but I am getting cold feet, could really use a pep talk. ( LOL ). I would love any advice that would help my fears. I have done tune ups in past, but this engine looks intimidating, because of all the parts and electronics. Thank you. Need to get to it in about a week from now!
#2
I do not have a video on that yet. Now of course the front bank is easy but the rear just needs the upper intake off, it's not too bad. If you send me a email address where I can send you a pdf of the intake removal that would help out allot with your cold feet. If you are over 30k miles and I assume you are be sure to replace the intake gasket.
#3
First off , I can not thank you enough for taking the time to help me! my email address is matlockpaul@hotmail.com. Where can I buy the intake gasket, and how much should it cost?. I tried a local part shop, they said I may have to go to the dealer,I live in Canada.
How do you take off the little black nut/bolts that attach the are intake to the top part of the grill? I am guessing it is a hex or allen key.I mean the part that scoops the air from the front into the air filter! Those little black bolts that attach to the upper grill.
I have wathced a video on an older model escape v6, but a lot is different on my 2010.
How do you take off the little black nut/bolts that attach the are intake to the top part of the grill? I am guessing it is a hex or allen key.I mean the part that scoops the air from the front into the air filter! Those little black bolts that attach to the upper grill.
I have wathced a video on an older model escape v6, but a lot is different on my 2010.
#4
First off , I can not thank you enough for taking the time to help me! my email address . Where can I buy the intake gasket, and how much should it cost?. I tried a local part shop, they said I may have to go to the dealer,I live in Canada.
How do you take off the little black nut/bolts that attach the are intake to the top part of the grill? I am guessing it is a hex or allen key.I mean the part that scoops the air from the front into the air filter! Those little black bolts that attach to the upper grill.
I have wathced a video on an older model escape v6, but a lot is different on my 2010.
How do you take off the little black nut/bolts that attach the are intake to the top part of the grill? I am guessing it is a hex or allen key.I mean the part that scoops the air from the front into the air filter! Those little black bolts that attach to the upper grill.
I have wathced a video on an older model escape v6, but a lot is different on my 2010.
#9
- NOTE: Clean and inspect all sealing surfaces. Install new gaskets.
- Position the upper intake manifold and install the 7 bolts.
- Tighten the bolts in 2 stages in the sequence shown.
- Stage 1: Tighten to 10 Nm (89 lb-in).
- Stage 2: Tighten an additional 45 degrees.
Upper Intake Manifold (View 1 of 2)
Item Part Number Description 1 14A464 Evaporative Emission (EVAP) canister purge valve electrical connector (part of 12C508) 2 9D289 EVAP tube-to-EVAP canister purge valve quick connect coupling 3 14A464 Electronic throttle control electrical connector (part of 12C508) 4 14A464 EGR regulator electrical connector (part of 12C508) 5 — EGR tube fitting (part of 9D477) 6 W700497 Engine control wiring harness retainer (part of 12C508) (2 required) 7 — Brake booster vacuum tube 8 6K817 PCV tube 9 14A464 Manifold Absolute Pressure (MAP) electrical connector (part of 12C508)
Upper Intake Manifold (View 2 of 2)
Item Part Number Description 10 W713391 Upper intake manifold bolt 11 9Y450 Upper intake manifold bolt (6 required) 12 9424 Upper intake manifold 13 — Upper intake manifold gasket 14 W701775 Upper intake manifold support bracket bolts (2 required) 15 9J444 Upper intake manifold support bracket
#10
No no a simple thanks is all I need. I love to help out people in need.