New Member Area New to Ford Forum? Stop in tell us about you.

New 2016 Fusion Owner

Thread Tools
 
Search this Thread
 
  #1  
Old 06-07-2022 | 11:08 AM
Stogiesaurus's Avatar
Thread Starter
|
Junior Member
Joined: Jun 2022
Posts: 2
From: Little Rock
Default New 2016 Fusion Owner

Hello Everyone,
Name's Larry and I just bought a 2016 1.5L Fusion from Copart. I wasn't familiar with the coolant issue until after I bought it. Other than the right side body damage the car seems to be in good condition. The interior is clean. The car appears to have been well maintained. How worried should I be?

I'm one of those introverted Engineers who likes to DIY because I know it will get done better than average.
Larry
 
  #2  
Old 06-07-2022 | 12:39 PM
hanky's Avatar
Senior Member
Joined: Jun 2010
Posts: 15,301
Default

As a good engineer , you will read up and learn as much as you can before starting the job.

As a smart engineer, you might after doing the above research decide to give the job to a qualified shop.

Not in any way saying you could not handle the job, but,,,,,,,,you might have second thoughts.
 
  #3  
Old 06-07-2022 | 01:13 PM
Stogiesaurus's Avatar
Thread Starter
|
Junior Member
Joined: Jun 2022
Posts: 2
From: Little Rock
Default

Originally Posted by hanky
As a good engineer , you will read up and learn as much as you can before starting the job.

As a smart engineer, you might after doing the above research decide to give the job to a qualified shop.

Not in any way saying you could not handle the job, but,,,,,,,,you might have second thoughts.
Yep, If my research gives me pause I will take it to a Pro.
 
  #4  
Old 06-07-2022 | 06:17 PM
hanky's Avatar
Senior Member
Joined: Jun 2010
Posts: 15,301
Default

Spoken like a real Pro !
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Laura-Lee
New Member Area
4
02-06-2020 04:48 PM
Laura-Lee
General Tech
0
02-04-2020 07:41 PM
tearsten
New Member Area
0
01-21-2020 03:21 PM




All times are GMT -5. The time now is 01:52 AM.